Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Bwjdjww E Nrjpfx Afysk Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Year of construction: 2008, operating hours: 55,000 h, condition: excellent (used), functionality: fully functional, Heidelberg Dymatrix CSB Year: 2008 Bwsdpfx Aoyf E Icjfysk Size: 760 x 1060 mm Die-cutting, creasing, stripping and blanking unit Impressions: 290 million Maintenance: All preventive and OEM services carried out Spare parts: some available Condition: very good, in production

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Bjdpfjud Axgex Afyjwk

Condition: used, type of input current: three-phase, product width (max.): 1,600 mm, The machine is designed for slitting and rewinding of flexible materials such as plastic films, paper, Bwodpfjyy Rh Eex Afyek laminates, adhesive tapes and foils. Technical details: - Working width: 1600 mm - Slitting system: razor blades / rotary knives - Materials: PE, PP, PET, PVC, paper, laminates - Input voltage: 400V / 3-phase

Condition: good (used), Offer consisting of: Polar 115E, year of manufacture 1995, side air tables, hydraulic lifting device on the left Bwsdpfx Afsyxy U Ssyok

Condition: excellent (used), Electro-hydraulic swing arm punching machine Manufacturer: Sandt Bwedeyy S H Njpfx Afysk Model: ST 137 with operating manual Pressing force: 8 tons Table: 700 x 360 mm Punching head: 300 x 500 mm Maximum installation height: 215 mm Maximum punching stroke: 45 mm For paper, leather, cardboard 380 Volt

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 2,500 mm, 1.1 Used Göpfert SRE Maxi 250 Bwjdsyyuxuepfx Afyok 1.2 Brand: Göpfert 1.3 Model: SRE Maxi 250 1.4 Year: 2004 1.5 Country of origin: Germany 1.6 Z- tools (4) Tools for handholes, etc. 1.7 1 color flexo printing unit (2800mm width, 6 repeats) 1.8 Max. Sheet size: 2500x6500mm 1.9 Max. Printing size 2500x2500mm 1.10 Min. Printing size 360x1000mm 1.11 Conveyer length 6000mm

Condition: used, Year of construction: 2021, Manufacturer: Robopac Model : Robotape 50 M Year : 2021 Type: Semi-automatic taping machine Conveyor belt speed: 22 m/min Adhesive tape width: 50–75 mm Minimum box dimensions (LxWxH): 150x110x110 mm Bwsdpsyy S Imofx Afysk Maximum box dimensions (LxWxH): ∞x500x500 mm Minimum weight per box: 1 kg Maximum weight of boxes: 50 kg Power : 0,4 kW Supply : 400 V – 50 Hz Weight : 170 kg  

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 720 mm, Model: SFML-720C Weight: 840 kg Bedeyxl Tyopfx Afyjwk Power: 8.5 kW Voltage: 220 V Date of manufacture: 2011 CE certified

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1044951, Size 90 cm, straight line, lock bottom, 6 feeder belts, vibrator on feeder, pre-fold station, final fold station Bedpfx Aoyx Trdjfyowk

Condition: like new (used), Year of construction: 2017, operating hours: 15 h, functionality: fully functional, machine/vehicle number: MP.DBDO.00084, Size 75 x 106 cm, Non-stop function in feeder and delivery, Integrated cutting plate fine adjustment, Motorized die-cutting pressure adjustment, Simple operating concept, The basic model is already equipped with all functions and equipment to start production, Short makeready times, High flexibility thanks to extended range of materials, Accommodates smaller die-cutting tools Bodpjyx Tp Ajfx Afyowk

Condition: like new (used), Year of construction: 2019, machine/vehicle number: 133901, Folder gluing machine for processing straight-line boxes, crash-lock bottom boxes, double-wall boxes, and CD/DVD sleeves. Feeder with vibrating device, infinitely adjustable distance between carton blanks, pre-breaking crease 1+3, bottom disc glue unit, electronic counter with digital display including preset counter, delivery with kick-out device, drying and press section synchronized with machine speed, can be controlled separately, belt speed 150 m/min. Bjdeyx Tn Espfx Afyowk

Condition: good (used), Year of construction: 2012, operating hours: 21,200 h, functionality: fully functional, Model Heidelberg Varimatrix 105 CS, automatic die-cutting machine for die cutting, creasing, and embossing, year of manufacture 2012, format: min. 350 x 400 mm, max. 750 x 1050 mm, speed: max. 7,500 sheets/hour, operating hours: approx. 21,200, Incoterm: loaded on truck, assembly condition: in production, non-stop sheet feeder with pre-piling device, non-stop delivery with gripper edge removal, elevated by 30 cm including platform height extension, three-phase auto-transformer, hold-down device for thin or wavy material, fine adjustment system for die-cutting plate, small sheet device (min. sheet size 300 x 350 mm), mechanical double sheet control, side lays on both operator and drive side, stripping device at delivery, standard stripping frame, quick-lock chase with fixed make-ready plate, stripping station, touch-screen control, Centerline system, without compressor. Bodpfxoyw H Dqs Afyjwk Delivery date: 05-2026

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine by Franz Pytlik Maschinen, Nürnberg. Featuring a robust cast iron construction, this machine is designed for precise cutting of large formats in bookbinderies and printing shops. The guillotine offers an impressive cutting width of 112 cm, allowing processing of oversize sheets. The working table has a depth of 72 cm. The blade mechanism operates smoothly and easily, and the rear gauge is adjusted with a handwheel for accurate positioning. Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Model: Manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Solid cast iron frame – Cutting lever with wooden handle – Rear gauge adjustable via handwheel Bjdexzu Ucopfx Afyjwk – Large, stable work surface – Lower shelf for sheets and tools – Blade in good condition (sharpenable) Technical condition: Machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in binderies, printing shops, technical studios, or model-making workshops.

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer Bwjdpfouyhf Hjx Afyok The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Bwedjyuw S Eepfx Afyjk Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld

Condition: used, functionality: fully functional, overall weight: 4,500 kg, Drossert die-cutting press, working area 72 x 102 cm, 1 frame, various operating modes, single cycle, continuous operation, programmable with timer, safety mats. Bwodpfxsyu H Ive Afyek

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control Bwedpfxjx Ez Umo Afysk 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: Bwsdpsyx Uy Aofx Afysk A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: ready for operation (used), Year of construction: 1991, A W+D envelope manufacturing line is available. Blank length range: 265mm-653mm, blank width range: 214mm-726mm, max. production output: 450/min, paper weight range: 80g/m²-150g/m², max. paper roll diameter: 1500mm, max. paper roll width: 686mm, window reel width range: 30mm-490mm, window material section length range: 55mm-280mm. Documentation available. An on-site inspection is possible. Bwodsyyy Nlspfx Afysk

Condition: ready for operation (used), Year of construction: 1979, An envelope manufacturing system W+D for special formats, photo pouches, mailings and multiple foldings without gumming is available. Paper weight range: 70g/m²-270g/m², min. bottom flap pre-creasing: 10mm, max. side flap pre-creasing: 50mm, max. paper width: 620mm, max. paper length range: 150mm-470mm, bottom flap folding range: 25mm-45mm, min. format with 38mm fold: 115mm/100mm, max. format with 20mm fold: 280mm/380mm, min. closing flap: 50mm. Documentation available. An on-site inspection is possible. Bwsdpfxjyyy Nfe Afyok

Year of construction: 1992, condition: ready for operation (used), A hydraulic industrial system Schneider for paper and cardboard processing is available. Power: 28kW, oil filling: 400l, operating pressure: 100bar-240bar, max. table load: 300kg, max. product dimensions X/Y: 2000mm/3200mm, weight: approx. 7900kg. An on-site inspection is possible. Bwedpfx Afeyyy I Ujyek

Condition: used, Year of construction: 1999, • Shaftless unwinder A • Shaftless unwinder B • Coating unit (adhesive application system) • Laminating unit • Winder (rewinding unit) • Film tension control system (including dancing rollers and load cells) • Automatic web guide unit • Rubber-coated impression roller • Decentrable rollers • Electrical, pneumatic, and control systems ADHESIVE SYSTEM • Solventless adhesive application system • Adhesive feed system • Metering rollers Bwjdeyx Dk Rjpfx Afyjk • Transfer rollers for glue application • Rubber-coated coating/impression roller • Integrated glue mixer (included in scope) • Minimum supply: at least 3 transfer rollers included PROCESSING CAPABILITIES • Designed for lamination of flexible films • Compatible with solventless adhesives • Continuous coating and laminating process • Rewinding of laminated material onto final reel • Adjustable coating quantity via metering rollers • Adjustable lamination pressure CONTROL AND SYSTEMS • Electric system with control cabinet • Pneumatic system • Film tension control via load cells and dancing rollers • Web guiding system for alignment • Vapour suction system • Rollers conditioning system • Optional corona treatment system TECHNICAL FEATURES • Professional industrial laminating machine • Continuous operation design • Multi-section configuration: unwinding, coating, laminating, rewinding • Designed for stable operation under controlled environmental conditions • CE compliant (European Machinery Directive) MATERIAL HANDLING • Dual unwinding system for two substrates • Precision tension control during processing • Rewinding system for finished laminate • Compatibility with different film materials (as per process requirements)

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Direct sale only. BOBST SP 76 Die Cutter | 1997 | Automatic Die Cutting Machine | Excellent Condition | With Equipment For sale: automatic die cutter BOBST SP 76, year 1997. The machine is in very good technical condition, fully operational and ready for immediate use. Regularly serviced and well-maintained, currently running in production – available for on-site inspection. Ideal for the production of carton packaging – precise, stable, and reliable. Technical details: Model: BOBST SP 76 Year: 1997 Type: Automatic Die Cutting Machine Condition: Very good / Excellent Status: In production Equipment / accessories: - Speed Chase system – complete, ready for installation. Drawing without the system. - Stripping frames - Additional working tables - Approx. 400 thin 35 HRC plates (1mm thick) included - Complete and ready for operation The machine maintains parameters, runs smoothly, and does not require any upfront investment. An excellent investment for a printing house or packaging manufacturer seeking a proven BOBST machine. Machine available immediately. Inspection and testing possible. More pictures and video available on request. Bedpfx Ajyxbwbofyjwk

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: Bwedpfxeywpcpo Afyok foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter