Used 5 Axis Machining Center for sale (76,479)

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Gedpfswa R A Nox Ah Dskf Pallet automation with 21 pallets - the pallets are not included in the scope of delivery This machine is offered on a customer order basis!

Year of construction: 2002, condition: excellent (used), FIDIA K197 CNC Machining Center ​in very good and working condition​.​ Gksdpfxoppwnqe Ah Dsf

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Gksdpfxsx Hn Ddo Ah Djf Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Gkedpfx Aowbhq Hoh Dof Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 93,500 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: Fanuc Series 16i MB, workpiece diameter (max.): 32 mm, TECHNICAL DETAILS Travel X: 250 mm Travel Y: 200 mm Travel Z: 300 mm Max. workpiece diameter: 32 mm Spindle speed: 30,000 rpm Spindle taper: HSK-E40 Tool changer: 48 positions MACHINE DETAILS Number of axes: 5 Control: Fanuc Series 16i MB Power-on hours: 93,500 h EQUIPMENT Bar feeder LNS Hydrobar Express 332 Coolant filtration system Spindle cooling Through-spindle coolant (IKZ) Gedpox E U Exjfx Ah Djkf

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Working area X: 3,740 mm Working area Y: 1,570 mm Working area Z: 350 mm 4th axis: Yes 5th axis: 5-axis spindle Tool changer positions: 34 Vertical drilling spindles: 12 Gkodpfxex Hllxe Ah Dof Machine table: Console table Table positioning automation: Yes Special workpiece clamping system: For frames Software: FORMAT 4 WOOD FLASH, TPA ALBATROS Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: approx. end of January 202 Storage location: NRW

Condition: good (used), Year of construction: 2004, 5-axis CNC machining center – universal – Manufacturer: DMG Machine model: DMU 160 Control: MillPlus IT Year of manufacture: 2004 TECHNICAL DATA Travel distances - X-axis (mm): 1,600 - Y-axis (mm): 1,250 - Z-axis (mm): 1,000 - A-axis (swivel head): 0 degrees / 90 degrees - B-axis (rotary table): 360 degrees Spindle: Swivel milling head (H/V) - Internal coolant supply (ICS) (bar): 40 - Max. spindle speed (rpm): 10,000 Tool changer: Double gripper Tool magazine: Rack-type magazine - Tool holder: SK50 Gkedpfx Ahox Ey N Ae Djf - Tool positions: 120 Machine table: Rotary table Pallet system: Rotary pallet changer - Number of pallets: 2 - Pallet size (mm): 1,250 x 1,000 EQUIPMENT FEATURES + Electronic handwheel + Chip conveyor + Coolant spray gun + Rotating viewing window + Operating mode 4 + Air blast through spindle center, selectable via M-function Subject to changes and errors in the technical data and information.

Condition: used, Year of construction: 2002, Manufacturer: DMG GILDEMEISTER, Model: DMU 160 P, Year of manufacture: 2002, Serial No.: 11220000223, Control system: Heidenhain, Model iTNC 530 (completely overhauled), Travel ranges X/Y/Z: 1,600 x 1,250 x 1,000 mm, Spindle speed: 18,000 rpm, Table dimensions: 1,250 x 1,500 mm, Tool changer: 60 positions, Tool holder: HSK 100, Rapid traverse: 60 m/min, Feed rate: 20 – 15,000 mm/min, Table rotation speed: 10 rpm, Operating hours: running 13,879 h / load 49,304 h, Oil mist extraction, Chip conveyor, Manufacturer: Blechtechnik, Model: DMU 160 P/U, Year: 2002, Band filter system, Manufacturer: Bürener Maschinenfabrik GmbH, Year: 2002, Model: KA980, Accessories package consisting of: telescopic drawer cabinet, 5 drawers, contents: various T-slot nuts, tool holders, clamps. Gjdpfx Asx A U Sqeh Dokf This machine is part of an online auction.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Gkodpfsx Hn A Tsx Ah Djf Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: excellent (used), Year of construction: 2018, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller model: Heidenhein, workpiece height (max.): 620 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 350 kg, Equipment: chip conveyor, documentation/manual, Our 2018 model CMX 70U CNC 5-Axis Machining Center with Heidenhain control, in very good condition, is now available for sale due to excess capacity. We are located in Çayırova, Şekerpınar. The machine is available for on-site inspection. Only serious buyers are requested to contact us. Comes with kinematic set, Renishaw probe, and an integrated tool length measurement device. Direct mobile contact. (Whatsapp available) Gkedpfx Ahexm U E Ee Dsf

Condition: excellent (used), Year of construction: 2004, operating hours: 60,477 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain iTNC 530, controller model: iTNC 530, workpiece weight (max.): 800 kg, total height: 3,000 mm, total length: 3,500 mm, total width: 2,500 mm, table width: 800 mm, table length: 800 mm, overall weight: 9,600 kg, spindle speed (min.): 18,000 rpm, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1050 Y-axis travel mm: 710 Z-axis travel mm: 710 B-axis degrees: 103º Feed rates m/min: 30 Rapid traverse m/min: 30 Milling/turning table nc: Gsdpfx Aox Arcash Dokf Number of pallets: 1 Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 28 (40%) Spindle torque Nm: 121 Tool system Tool holder: SK 40 Tool magazine slots: 32 Tool changer: Pick-up Chip-to-chip time s: 14 Equipment Rigid table with integrated rotary table Swivel head Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Tool measuring arm Internal coolant supply Machine running times Under power: 151446 Spindle Working: 60477 Basic machine dimensions / weight Length mm: 3500 Width mm: 2500 Height mm: 3000 Weight kg: 9600

Condition: used, Year of construction: 2008, 5-Axis CNC Machining Center Used Machine Year of manufacture: 2008 Condition: Currently still in production Equipment and Technical Data: CNC Control: Siemens 840 D Max. travel of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ±90 degrees C = ±270 degrees HSD milling unit with 10 kW, liquid-cooled Infinitely variable spindle speed up to 24,000 rpm Permanent grease lubrication Tool holder: HSK 63F 1 multi-spindle boring unit with pneumatic advance stroke, mounted to the milling unit 16 individually selectable vertical drilling spindles 1 horizontal twin drilling spindle in X-direction and 1 in Y-direction Drill holders: 10 mm diameter each Note: Workpieces that can be processed with the boring unit: 900 mm with X/Y reference spindle Milling unit and boring unit with extraction connections: 200 mm each, each with pneumatically operated shut-off valve, combined discharge for customer-side dust extraction system, diameter 300 mm Tool changer: 1 drum tool magazine for 5-axis milling unit, 20 positions for tool diameters up to 90 mm or max. 160 mm if sorted arrangement, max. tool length 160 mm One saw blade up to max. 300 mm diameter can be stored and exchanged, but will occupy 3 magazine positions Gkedpfjx Enqzox Ah Dsf Special tool lengths up to max. 180 mm possible with corresponding restriction of the working area. Max. tool weight: 6 kg (including HSK holder) Total weight in magazine: approx. 60 kg Magazine arranged at the aggregate exit position Machine table: 8 support rails, manually adjustable along the length of the machine, each with 1 retractable workpiece stop, fixed towards the operator Division of the table surface into two clamping zones, each station: - 1 length stop, pneumatically raisable and lowerable - 2 pneumatically raisable and lowerable slide rails - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-liter intermediate tank 16 vacuum suction cups, 110 mm diameter Suction cup set for stair manufacturing incl. touch valve 1 clamping device for posts/bends Incl. chip conveyor Incl. NC-Hops 5 WOP system Incl. bumper safety device at the front and fencing at the sides and rear Centralized lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Condition: used, Year of construction: 2006, operating hours: 13,016 h, functionality: fully functional, machine/vehicle number: 86664, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, overall weight: 16,500 kg, number of slots in tool magazine: 36, Equipment: documentation/manual, - Year of manufacture: 2006 - One owner, used exclusively by us - Fully functional, powered on, ready for demonstration - Control: Heidenhain iTNC 530 Gkjdpjx Hhfbefx Ah Dof - Control on: 32,532 hours - Program run: 13,016 hours - Spindle: SK 40 / 12,000 rpm | 40 kW - Tool magazine: 36 positions - Travel X-axis: 2,940 mm - Travel Y-axis: 900 mm - Travel Z-axis: 950 mm - Rotary table: Ø1000 mm - 3D probe: RMP 60 Renishaw - Tool probe: TT140 Heidenhain - Coolant through spindle: 40 bar Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: good (used), Year of construction: 2017, Traverses XYZ: 600 x 655 x 500mm, 350mm diameter table, max table weight 250kg, A axis table tilt +30°, -120°, C axis 360degrees, 18.5kW, Godox Eir Depfx Ah Djkf 12000rpm, BT40, 30 station tool changer, Fanuc I series control, swarf conveyor,

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min Gkedpsu Idm Nofx Ah Def total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Godpfxjx Eh Iqe Ah Dokf Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 520 mm, CNC control Heidenhain iTNC530 NC rotary tilt table right Fixed table on the left 30-fold tool changer el. handwheel IKZ (20 bar) chip conveyor Technische Daten / technical details: Travel X/ X-travel 1200 mm Traverse path rotary swivel range in X / X-travel rotary swivel side 500 mm X-travel fixed machine table area in X / X-travel fixed table side 570 mm Travel distance Y / Y-travel 650 mm Z-travel 520 mm A-axis / A-axis +90 / -110 ° C-axis / C-axis 360 ° Spindle taper SK40 Drehzahlbereich / spindle speed 30-8000 rpm Feed rate / infeed 0-45000 mm/min Gkodpfetu S Irsx Ah Djf Schwenk-Rundtischababmaßen / swivel rotary table dimensions 520 x 420 mm interfering edge diameter 610 mm / interfering edge diameter 610 mm Höhe des Stützlageres / height of the support bearing 90 mm Fester Tisch Abmaße / fixed table dimensions 700 x 600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 30 Antriebbleistung / drive capacity 22 kW Gewicht ca. / weight 8500 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2910555210188, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 30,000 rpm, coolant supply: 80 bar, number of slots in tool magazine: 326, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle with 30,000 rpm | HSK-63 - TM200 with 200 tool pockets - IKZ 80bar Basic machine G550 AB generation 2 Travel path of the X-axis 800 mm Travel path of the Y'-axis 1020 mm Travel path of the Z-axis 970 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control HEIDENHAIN TNC 640 with machine control panel GROB4Pilot Swivel axis calibration GSC Classic Interface (software and hardware) for connection of an automation system - standard interface version 1.7 (GROB) Time-controlled start of warm-up program - programmable at the HMI Godpfxox Evyke Ah Djkf Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Pallet guide element at rotary table Motorized spindle HSK-A 63 30,000 rpm, 48/63 Nm, 40/53 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 for extra-long tools with 126 pockets in total Additional tool magazine TM200 HSK-A 63 with 200 tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Scraper-type conveyor for larger quantities for aluminum chips, discharge height 1,600 mm High-pressure cutting fluid system (10-80 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Changeable cutting fluid pressure increase for the motorspindle nozzles Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Volume cutting package with detection element and flushing function Flushing unit (Z-axis) Machine accuracy package 1 Radio touch probe RMP600 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Gkedpexxpbfsfx Ah Def Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Godpfx Ahexva Aho Djkf Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: used, Year of construction: 2013, functionality: fully functional, The DMG MORI LASERTEC 20 PrecisionTool, introduced around 2013, is a compact, high-precision 5-axis laser machine designed for contactless machining of diamond (PCD/CVD) and CBN tools. It is recognized for replacing traditional grinding and wire EDM processes, offering a more efficient and 'green' technological solution. Gkodpfx Ahox E Ugpe Djf Machine Type: 5-axis laser machining center Footprint: Compact 3.5 m² Axis drive: Linear motors on X, Y and Z axes with acceleration > 2 g Workpiece size: Max. ø 200 mm x 344 mm length Travel: X axis: 200 mm, Y axis: 400 mm, Z axis: 280 mm CNC: SIEMENS 840D solution line with CELOS user interface Software: LASERSOFT software packages for tool-specific programming Positioning accuracy: 5 µm Automation: Integrated PH 10 pallet handling systems

Condition: like new (used), Year of construction: 2011, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 32 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: Professional 5, workpiece height (max.): 500 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 350 kg, total height: 3,200 mm, total length: 3,550 mm, total width: 29,000 mm, overall weight: 15,700 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 323, tool length: 300 mm, tool diameter: 70 mm, tool weight: 8,000 g, CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40; Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Worktable Table dimensions mm: 500 Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 Spindle Spindle speed rpm: 20000 Tool system Gsdpsvfmlrjfx Ah Dokf Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: Matrix Max. Tool Diameter 70 With occupied neighboring places mm: 140 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Helical interpolation Custom Macro common variables (100) Machine running times Spindle Working: 0h (Retrofited) Basic machine dimensions / weight Length mm: 3550 Width mm: 2900 Height mm: 3200 Weight kg: 15700

Condition: good (used), MIKRON UCP 600 VARIO is a 5‑axis machining center engineered for high precision, accuracy and reliability in complex machining. Table 320×320 mm; travels X600 Y450 Z450; indexing C n x360°; head B -115/+30°. 30‑station tool magazine; tool Ø max 80 mm, length 200 mm, weight 8 kg; spindle nose HSK‑A63. Spindle stepless 0–20,000 rpm, 30 kW, 91 Nm torque. Feed 15,000 mm/min, rapid 22 m/min; power 3x400 V 50 Hz. Machine weight ~7,700 kg; dims L6820×W4800×H2540(2810) mm. Options: paper filtration, water cooler, chip conveyor, EROWA UPC table, electronic handwheel, lamp, status light. 4+5 axis revised 2023. Achieves tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine‑tool sectors. Gedpfjxx U U Rjx Ah Dskf

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Gedpfx Ahoxx U Nzj Djkf

Condition: excellent (used), MIKRON HPM 800 U is a 5‑axis machining center for precision, high accuracy and reliability. Table 630×440 mm, 5 T‑slots, table load 800 kg; travels X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, spindle‑nose to table 600 mm; 115 tools, Ø max 80 mm (160 free), tool length 350 mm. Spindle 0–20000 t/min; feed 0–20000 mm/min; rapid 45 m/min; accel. 6 m/s; max feed force 6000 N; 3×400V 50Hz; 55 kW; weight ~15000 kg; size 3505×3100×2980 mm. Accessories: high‑pressure coolant, paper filtration, 2 pallets, touch probe, laser tool preset, chip conveyor. Suited to tight tolerances in automotive, aerospace, medical, watchmaking. Gkjdpsxx U Nnofx Ah Dsf